View SML-11_4595247.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheet
SML-11 Series
3020 1208 3.0 2.0mm t=1.6mm
Color Type
Features Side-view type 3.0 2.0mm t=1.6mm
L M
V F
D P
Y W
Specifications
Part No. Absolute Maximum Ratings (Ta 25 ) Electrical and Optical Characteristics (Ta Emitting Power Chip Forward Voltage VF Reverse Current IR Dominant Wavelength D Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min.*2 Typ. Max.*2 PD(mW) IF(mA) IFP(mA) VR(V) Topr( ) Tstg( ) Typ.(V) IF(mA) ( A) VR(V) (nm) (nm) (nm) IF(mA) Red GaAsP on GaP 2 Orange Yellow Yellowish Green GaP Green Green 70 25 60
1
25 ) Luminous Intensity IV Min. Typ. (mcd) (mcd) IF(mA) 2.2 3.6 2.2 6.3 10 6.3 20 5.6 3.6 2.2 16 10 6.3 2:Reference
SML-110VT SML-110DT SML-110YT SML-110MT SML-110FT SML-110PT
625 602 2.1 4 -30 to +85 -40 to +85 2.2 20 100 4 569 562 557 587
630 605 590 572 565 560
635 608 593 20 575 568 563
1:Duty1/5, 200Hz /
Dimensions
3.0 2.3 1.6 0.3 0.8
Recommended Solder Pattern Viewing Angle
SML-11 Series
1.5
X-Y
ANGULAR DISPLACEMENT(deg)
20 30 40 50 10 0 10 20 30 40 50 60 70 80 50 0 50 90 100
Directivity (deg)
X' - Y'
ANGULAR DISPLACEMENT(deg)
20 30 40 50 60 70 80 90 100 50 0 50 10 0 10 20 30 40 50 60 70 80 90 100
Directivity (deg)
2.0 1.6
60
1.8
70 80 90 100
Cathode mark
Emitting Direction
RELATIVE INTENSITY(%) RELATIVE INTENSITY (%)
RELATIVE INTENSITY(%) RELATIVE INTENSITY (%)
4-R0.4
1.8
LED
0.3
1.6 2.8
Terminal
Tolerance : 0.2 unit : mm
unit : mm
www.rohm.com
(c) 2010 ROHM Co., Ltd. All rights reserved.
1/2
1.8
1.4
2010.05 - Rev.A
SML-11 Series
Electrical Characteristics Curves Forward Current-Forward Voltage
100
Ta=25C
FORWARD CURRENT IF (mA)
SML-110VT SML-110DT SML-110YT SML-110MT SML-110FT SML-110PT
10
1 1.0
1.5
2.0
2.5
3.0
FORWARD VOLTAGE VF (V)
Luminous Intensity-Atmosphere Temperature
1.6 RELATIVE LUMINOUS INTENSITY (a.u) 1.4 1.2 1.0 0.8 0.6 0.4 -40
IF=20mA
SML-110VT SML-110DT SML-110YT SML-110MT SML-110FT SML-110PT
-20
0
20
40
60
80
100
ATMOSPHERE TEMPERATURE
Ta (C)
Luminous Intensity-Forward Current
1.5
f=1kHz
RELATIVE LUMINOUS INTENSITY (a.u.)
SML-110VT SML-110DT SML-110YT SML-110MT SML-110FT SML-110PT
1.0
0.5
0.0 0 5 10 15 20 25 30
PEAK FORWARD CURRENT IF (mA)
Derating
(mA) 40
MAXIMUM FORWARD CURRENT
30
SML-110VT SML-110DT SML-110YT SML-110MT SML-110FT SML-110PT
20
10
0 -40
-20
0
20
40
60
80
100
AMBIENT TEMPERATURE
Ta (C)
www.rohm.com
(c) 2010 ROHM Co., Ltd. All rights reserved.
2/2
2010.05 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved.
R1010A

▲Up To Search▲

Price & Availability of SML-11

	To Download SML-11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .